LED Smart Meter Monitor
EW4030
?The Watts Clever EW4030 is designed to work with modern electricity meters. The Modern electricity meters have a flashing LED on the front of the unit which flashes at a fixed rate for each KwH of electricity usage. The LED sensor reads the speed of the flashing and coverts this reading to the power been used and it is then transmitted wirelessly to the display unit which may be located up to 30 metres away. (The actual distance depends upon the number and density of walls and floors the signal is transmitted through).
- ?Accuracy within 5%
- LCD Display Dimensions : 11.5cm (W) x 12.5cm (H) x 2.5cm (D)
- Transmitter Dimensions : 10cm (H) x 5.9cm (W) x 2.6cm (D)
- Sensor diameter 2cm, 50cm cable length
- Display Unit last for up to one year
- 2 transmitter batteries 'AA' type (supplied) last for up to one year
- Operating temperature of -5 to 50 degrees C
- Wireless transmission : 433 MHz SRD band
- LCD segmented display
- Displays current power, cost, and CO2 consumption
- Shows POWER, CO2, and COST history for the previous 5 hours, 5 days, 5 weeks, or 5 months
- Works with 1, 2, or 3 phase COST history for the previous 5 hours, 5 days, 5 weeks, or 5 months
- Works with 1,2, or 3 phase power supply
- Works with all voltages
- Data transmitted every 45 seconds
- Supports up to 5 channels
- Supports up to 3 tariff settings per day
- Alarm function for high usage warning
- Up to 30m transmission distance
?The product consist of 3 main parts, a display unit, optical sensor, and transmitter unit. The optical sensor is mount onto the front of your smart meter or digital meter inside your meter box. The data will then be sent via the transmitter to display unit.
The display unit will then show the data it receives in real time. Your can easily input your current electricity price, the monitor will then show how much you are spending on an hourly, daily and monthly basis. It is also possible to input two prices if you use off peak supply prices.
You don't need to worry about the phase supply problem. The sensor is design calculating the flashing LED which is not affected by the phase supply.
?
?
All support issues, FAQ's, and online help,?etc are now dealt with from our support centre. Here you will also find product instructions and other useful information:
Please visit www.support.wattsclever.com
?Product videos where available can be found on you tube at www.youtube.com/user/wattsclever
?
?